05-08-2024, 04:47 PM
[center]![[Image: SOM1TPlySvVZzRg0nNUrDFXCkOUH5NUk.jpg]](https://sanet.pics/storage-10/0524/SOM1TPlySvVZzRg0nNUrDFXCkOUH5NUk.jpg)
Stonex Cube Manager 4.4.20220216 (x64) Multilingual
File size: 232.6 MB[/center]
Cube-manager is a software for managing data from GNSS receivers and Total Stations. You can have Plano-altimetric elaborations, generate 3D models and calculate contours. The measurements can be displayed in 2D, 3D and superimposed on raster, satellite or cadastral images. Through a sophisticated internal CAD you can interact with the data using powerful and complete drawing tools and snap functions even in 3D. Importing and exporting data are supported in various formats such as DXF, DWG, KML, CSV, and others.
Cube-manager-p
The P is the Cube-manager's optional module dedicated to the post processing. It offers the possibility to perform correction calculations with maximum accuracy.
In addition to the basic features of the software, this module provides functions for the calculation of Stop&Go post processing, Static post-processing for single and multiple cases, Kinematic post processing, and least-squares Network Adjustments. Cube-manager P is constantly updated to improve its performance.
Cube-manager-t
The T is the Cube-manager's optional module that enriches and completes the topographic functions of the software. This module provides sophisticated functions of roto-translation and coordinate conversions. It enhances the management of TS surveys by integrating the traverse calculations and the 2D network calculation. It allows the georeferencing of raster images. The aim of our developers, when implementing these functions, is always simplicity and intuitive use; in addition to that, users can always make use of technical
support.
Cube-manager-m
The M is the Cube-manager's optional module dedicated to modeling. This is the module designed for professionals who will work on constraint triangulations, volume calculations, contour lines, height profiles etc. In this case the users will have all the CAD commands, COGO and all the functions on the graphic entities provided in the basic software core but will also be able to perform even more specific functions such as those mentioned above.
Whats New
Updates: official site does not provide any info about changes in this version
Homepage
Stonex Cube Manager 4.4.20220216 (x64) Multilingual
File size: 232.6 MB[/center]
Cube-manager is a software for managing data from GNSS receivers and Total Stations. You can have Plano-altimetric elaborations, generate 3D models and calculate contours. The measurements can be displayed in 2D, 3D and superimposed on raster, satellite or cadastral images. Through a sophisticated internal CAD you can interact with the data using powerful and complete drawing tools and snap functions even in 3D. Importing and exporting data are supported in various formats such as DXF, DWG, KML, CSV, and others.
Cube-manager-p
The P is the Cube-manager's optional module dedicated to the post processing. It offers the possibility to perform correction calculations with maximum accuracy.
In addition to the basic features of the software, this module provides functions for the calculation of Stop&Go post processing, Static post-processing for single and multiple cases, Kinematic post processing, and least-squares Network Adjustments. Cube-manager P is constantly updated to improve its performance.
Cube-manager-t
The T is the Cube-manager's optional module that enriches and completes the topographic functions of the software. This module provides sophisticated functions of roto-translation and coordinate conversions. It enhances the management of TS surveys by integrating the traverse calculations and the 2D network calculation. It allows the georeferencing of raster images. The aim of our developers, when implementing these functions, is always simplicity and intuitive use; in addition to that, users can always make use of technical
support.
Cube-manager-m
The M is the Cube-manager's optional module dedicated to modeling. This is the module designed for professionals who will work on constraint triangulations, volume calculations, contour lines, height profiles etc. In this case the users will have all the CAD commands, COGO and all the functions on the graphic entities provided in the basic software core but will also be able to perform even more specific functions such as those mentioned above.
Whats New
Updates: official site does not provide any info about changes in this version
Homepage
Quote:https://filestore.me/af2djxd6jm40/Stonex...net.st.rar
https://rapidgator.net/file/5a23d75a3b9f...t.rar.html